Published Sep 1. 2015 - 12 months ago

Martin's Mundane Crane Fly

Articles relating to pattern

Originator: 
Martin Joergensen
Pattern type: 
Terrestrial
Difficulty: 
Easy
Instruction: 
The steps to tying a crane fly are few and simple, which also corresponds well with the mundane principle.
  • Prepare 6-8 pheasant tail fibers by tying a knot or two on each. Using a thin crocheting needle makes this process much easier.
  • Start the thread in the front part of the hook shank
  • Tie in the legs. They need to be about 2½ centimeters or 1 inch in length depending on the fly size. You can be meticulous and arrange them as on a live natural, or you can simply tie in three on each side, pointing outwards to the rear as on a dead insect.
  • Cut a piece of Antron or Poly yarn about 10 centimeters or 4 inches in length. If the yarn is thin you may want to double it and use two strands, if it's thick you can split it.
  • Twist the yarn by rolling one end repeatedly in the same direction between the fingers while holding tight on to the other end.
  • Double the twisted yarn without losing the grip. I sometimes use the hook eye to catch it. Let in unroll to form a rope.
  • Fasten the body material on top of the shank, having the twisted part to the rear and the body length about 1½ times shank length. Just use a few tight wraps.
  • Unravel and split the forward pointing yarn in two equal parts to form the wings.
  • Wrap in front of and over the wings to separate them.
  • Take a few wraps in front of the wings, whip finish, cut thread and varnish.
  • Trim the wings to a proper length.
  • If you want to be fancy, use a black or brown marker to color the body darker than the wings.
Materials: 
Hook
Kamasan B170 size 8-12
Tying thread
Black 6/0
Legs
Knotted pheasant fibers
Body/wings
Antron or Poly yarn, light gray, cream or tan
Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.