G-String Eyes - Saving the brass nuts from the ends of guitar strings yeilds some fancy eyes for flies - Global FlyFisher

GFF logo



   

G-String Eyes


Published Jan 11th 2009

Saving the brass nuts from the ends of guitar strings yeilds some fancy eyes for flies

By

 
  A nut from the end of a guitar string makes perfectly good eyes for flies.

Many fly tyers are musicians too; maybe a guitarist or mandolin player. If you are one of those, you may be throwing away perfectly good fly tying material when you change a set of strings. The wire has many obvious uses for making extremely durable flies, but have you thought of using the string nut for making eyes on flies?

The Upsides: They are brass and durable. They have a notch perfectly centered down the middle of the nut. They are heavy enough to make a fly sink and yet are light enough to cast with a small line weight. And, the open hole in the middle of the nut makes a perfect silhuette of a large eye.

The Downsides: They only come in one size and you only get 6 every time you change a set of guitar strings. It takes a while to collect quite a few to tie some flies. They proportionally work best on streamer hooks sized 8 and 10.

Where do you get some for yourself? The most obvious answer is if you play guitar, save them yourself everytime you change a set of strings. If you are an active player, you'll have several dozen saved up each year for every guitar you change out. Alternative ways to get your hands on some are to ask your guitar playing friends to save them when they change out strings, or go to a guitar shop and ask them for some, as they frequently change out strings for customers.

I am sure other string instruments have similar nuts to secure to the bridge of the instrument. My banjo strings do not. My guitar strings do. Maybe larger stringed instruments have larger nuts, but I am unfamiliar with those. The rest of this article will focus on guitar string brass nuts, as they are most common and readily available.

Tying With G-String Eyes

Preparing a place to tie them in

In this example of tying a Clouser minnow, the G-string eye is not tyed on first. (Normally when tying Clousers, the dumb-bell eyes would be tyed on first.) Instead, tie the calf tail in at the 1/3-point on the hook. Cut the ends at a 45-degree angle as shown in the photo.

 
  Cutting the material at a 45-degree angle as shown above helps prepare a perfect place to seat the G-String Eye perfectly on the hook shank.

An easy way to work with the G-String Eye

G-String eyes can be maddeningly frustrating to work with. Since they are round, they have a tendancy to roll everywhere, including off your work table and off the thread as well. A simple trick is to wrap the thread 2x in the center groove of the nut prior to placing it on the hook shank. Don't try to tie the nut directly on the hook shank without doing this trick first. You'll not have much success.

Now, with the thread wrapped 2x around the center of the nut, simply slide the nut up and down the thread to place it exactly where you want it on the hook shank. The 45-degree cut in the material on the hook helps you situate the G-string eye on the top of the hook shank.

 
  Two wraps of thread around the G-string eye will allow you to slide it in place to tie on the hook shank. The weight of the bobbin is all that is needed to hold it on the tying thread until you are ready to slide it in place.

Tying the G-String Eye on the hookshank

The photo to the right illustrates how to seat the G-string eye on the hook shank. It is quite easy to tie them in, using the same techniques you would with a dumb-bell eye. Cross wrap a few times to seat the G-string eye firmly against the 45-degree-angle and on the hook shank.

 
  There's nothing much easier than tying on a G-String Eye. A few criss-cross wraps to snug it against the 45-degree cut is all it takes to firmly seat the eye on the hook. Apply a few drops of tying cement or clear fingernail polish tolock the thread wraps in place.

Clouser patterns are easy to tie with G-String Eyes.

 
  G-String Clousers are a natural fit for using G-String Eyes.

 


User comments
From: wayneprejeant - Full name and email anonymized  Link
Submitted July 19th 2011

Just use glass seed beads, it works fine.


From: jim morris · admin·at·treeneflyfishers.com  Link
Submitted May 4th 2011

great idea...i also plink on the old geetar !

Oh and tippet rings I use them all the time..tapered leader is used untill its end is getting a bit short from changing/loosing flies and then a tippet ring is added, after that you can fish the same leader with different tippet strengths till you go blue in the face..I use around about 3 leaders a year now instead of 3 a day ! lol


From: stephen · stephen33·at·rogers.com  Link
Submitted May 12th 2009

The rings I saw are called tippet rings (very close in size) and I saw them on the Wapsi website as part of Anglers Image products.


From: stephen · stephen33·at·rogers.com  Link
Submitted May 12th 2009

These little gems are probably light enough that they can be used as rings on your line for attaching a dropper or tippet instead of a heavier and more awkward three way swivel. The hole easily accomodates three lines and even a loop and it's super strong. What do you guys think? I saw expensive rings for this purpose online the other day.


From: Stephen · stephen33·at·rogers.com  Link
Submitted April 30th 2009

Perhaps a small green glass bead or a set of beads in each end superglued and held together with mono burned down to the glass bead to hold it in. More realism and green transparency when the light shines through. I'm going tot ake my G-string nut to the bead store and insure a perfect fit. Good on ya!


From: Steve Edwards · musango·at·microlink.zm  Link
Submitted January 29th 2009

Great idea. I do both and have been for years ( not good at either - but love it ) Would never have thought of this wonderful and practicle method - Well done


GFF staff comment
From: Steve Schweitzer · steve·at·globalflyfisher.com  Link
Submitted January 18th 2009

Well, I don't know about genius, but as they say, a blind squirrel finds a nut once in awhile (pun intended).


From: davis · guitarkiddavis·at·hotmail.com  Link
Submitted January 18th 2009

wow you are a genius i would have never thought of that. i have played guitar for 10 years now and tied flies for 4 yrs and i never would have thought about using the ends of the guitar strings. Thanks for the great idea !
i give you an A plus.



Want to comment this page? Fill out the form below.
Comment
Only comments
in English
are accepted!

Comentarios en Ingles
solamente, por favor!

Your name Your email
Anonymize my information. Name and email will not be shown with comment.
Notify me on new comments to this article on the above email-address.
You don't have to comment to start or stop notifications.

All comments will be screened by the GFF staff before publication.
No HTML, images, ads or links, please - we do not publish such comments...
And only English language comments will be published.
Name and email is optional but recommended.
The email will be shown in a disguised form in the final comment to protect you against spam
You can see other public comments on this page