

|
|
First published before January 1st 2001 - More than 8 years ago
Bob's Big Magic Markers
Tying Speys with All New Colors
By Bob Blumreich of Silver Doctor Flyfishing
Bob's Big Magic Marker
Many of the old Scottish Spey
and Dee type flies called for materials that are now illegal under numerous state,
federal, and international laws. Other materials are available, but so expensive that
they're not practical to use on fishing flies. As ethical tyers and anglers, we need
substitutes that will maintain the character of the old flies, not break any laws, and not
require a second mortgage to buy. Here's a little trick to imitating heron belly hackles.
The natural feather has a white center, with black tips on each flue. Dying the feather
leaves the tips black, and the center white part takes the color. Using a black permanent
marker pen to stain the tips of a colored marabou feather creates a very natural looking
imitation of heron hackle. The solvents in the ink burn the excess fuzz from the flue, and
make it look very much like the real thing. The feather will get matted, so allow it to
dry, and then brush it out with a piece of Velcro. Using colors other than black on the
tips will give some "hot" combinations for steelhead flies. Consider the
following:
Polar Shrimp Variation
(shown above) |
| Hook |
any steelhead/salmon model |
| Body |
hot orange SLF or similar |
| Rib |
oval gold tinsel |
| Hackle |
red tipped-orange marabo |
| Throat |
red dyed mallard flank |
| Wing |
narrow strips of white goose |
| Head |
red |

| Green Butt Skunk Variation |
| Hook |
Any steelhead/salmon model |
| Tag |
fluorescent green floss |
| Tail |
Red dyed G.P. crest |
| Body |
Black SLF or similar |
| Rib |
Oval silver tinsel |
| Hackle |
Black tipped-white marabou |
| Throat |
Chartreuse dyed mallard flank |
| Wing |
Narrow strips of white goose |
| Thread |
Black |
HINTS:
A right handed tyer will strip the
left side of the body hackle
before tying in by the tip. Wrap the hackle close behind the rib, from
the 2nd or 3rd turn of tinsel. This depends on how dense the tyer wants
the finished fly.
Use dubbing needle to pick thru the
hackle fibers while wrapping the
counter rib. The wire is wound in the opposite direction to the riob &
hackle, in order to bind the hackle stem down, & reinforce it against
bite-thru's.
Throat hackles are usually two
turns of doubled feather that has been
tyed in by the tip.
Allow the wings to set slightly
down on the sides, in order to keep a
low profile.
Use of a cautery burner permits
close trimming of butts, without
disturbing the wing's position. See your Opthamologist.
Tight Ties!
Bob Blumreich
Did you find the above interesting? |
This other story related to "salmon flies" might also interest you:
Cluster Egg Fly |
| A few random articles for your entertainment |
|