Recent comments

Rolandas:

I enjoy

Rolandas:

I enjoyed your stories immensely. You indeed sound a bit crazy, but in a good way. The world of fly fishing needs more craziness like yours to make sure the truly great spots are still available to folks with a greater sense of adventure than wallet.

I am a New Zealand guide presently in Patagonia, and I'm bumming around on a shoestring budget and would appreciate any phone numbers that could help make Lake Strobel a possibility. Please feel free to contact me if I can ever help you with a New Zealand trip, too.

This reminds me

This reminds me of the little Vermont brook that runs through my friend's family farm that we fished while we were growing up. Maybe two to three feet wide at it's widest point, it had a good supply of brook trout of the 5 to 8 inch class. Just dap a dry fly across the surface of the water or drift a nymph and let it be pulled by the current under the undercut bank. Then pull it out with one of these little gems attached. They were small and colorful and perfect, just like all trout should be.

I've caught and have seen much bigger specimens, but some of these trophy trout with their distended bellies are kind of ugly when compared to these jewels of nature you can only find in these tiny brooks that come down from the mountains to feed larger bodies of water.

It's important to always remember that both ends of the size spectrum are trophies, they just have different criteria.

That's a very neat f

That's a very neat fly. We have small sand-hoppers that live in the intertidal region of sandy beaches here in New Zealand that look exactly the same. I've been looking for a fly to tempt the very selective Sea Trout near my home in the lower Waikato river and I have tied a few of these with great hope (because nothing else has worked so far!! -These are the most difficult Trout to catch I've ever come across anywhere in the world).

hi, I`ve got very ol

hi, I`ve got very old english flies with cat intestine hook. I`ve got 30 with double hook and 20 with single hook. I can take some photographs...?

at first glance i di

at first glance i did beleive these flies to be a bit intriguing, ( may be my bad taste or the artist in me) after further inspection they do seee a bit hastily made and crude. (kinda like an oil painting) you gotta give them about fifteen feet to see the beauty, ha ha!!!

Being a long time st

Being a long time steelhead nympher, I've tied a lot of beaded hares ear's over the years, but this was the first time incorperating the biot body and tail sytem of this pattern. That immediately caught my attention, and lucky enough, that of some recent fall rainbows also. I found it a great little twist on one of those days when "Old Reliable", was having a bad day. Keep a few around for lunker smallmouth bass as well! An easy to tie and durable pattern. Ray Baxter, London Ontario

Paul,

Paul,

Welcome to the GFF forum. Not the busiest place in the world, but anyhow.

Martin

Heiko,

Heiko,

Welcome to GFF!
It seems like a nice fish in your profile image - a peacock bass?

Martin

Dear Bob,

I am ha

Dear Bob,

I am happy you like the fly.
I am sorry that I can not understand your first question, my english is not so good and sometimes I can not understand well what is written. If you are talking about how to make the loop for the body, perhaps you will find some answers in my previous post.
About your second question, If you want to imitate a Hydropsyche larva perhaps my pattern will help you but there is a little difference in the body.
My caddis larva is an imitation of a case caddis larva paterns (I do not know, may be you call it October Caddis) and have gills (as you see on the picture with the live insect) over the whole abdomen part of the body, all over the segments. The Hydropsyche larva's gills are more concentrated on the down side of the abdomen. The upper side of the abdomen have less gills and is smooth and perhaps you will need some smooth stretching tape material for the back, the same that are used for the classic czech (or as Percas said - SLOVAK) nymph patterns.
But if you do not pay so big attention to that as perhaps and the fish will not do as well, you may use green antron and pale yellow, grey, or even white hare's dubbing and make a variation of my caddis larva.

Best regards and greetings from Bulgaria!

Rado

Pawel,

We don't s

Pawel,

We don't send anything anywhere... because we don't sell anything.
Direct your question to a dealer somewhere in Europe (or Poland!) and order your copy of this DVD from there.
Use Google or some other search engine to find it.

Martin

I just saw your cadd

I just saw your caddis larva imitation and i think it looks just like the real thing.WOW....I am so going to tie these in sizes 12-18. I can't wait to use this fly on the famous mother's day caddis hatch on the arkansas river in colorado.about making the loop at the end when applying the hare's fur.out of one stand of antron, do you divide the stand in half and tie it in to form the body, helping you out at the end when dividing the fibers to form the loop. I know this may sound some what confusing, heck its already confusing myself. One more question, can i tie this in a caddis green antron and do you use a pale yellow hares mask dubbing or fur.if so can i still use with the caddis green imitation.

thank you,
Bob DeMoss
Denver,CO

Do you sent it to Po

Do you sent it to Poland?

instead of using plastic

Robert,

instead of using plastic, shell-back or the like for the shield, why not try using clear ultra hair or natural hair of some sort, coat it sparsly with epoxy, and you will have a structured back/head, strong, and coated.

You could also upload your tying steps in the forum and challenge all the GFF-visitors and see, who brings up the best idea.

Kasper

Thank you for recommending Soft-Tex

Thank you for recommending Soft-Tex...I have access to it but have not used it...yet....in my youth I used to fish with live shrimp and enjoyed catching and handling them...have you noticed how they seem to have "two-pieces"? The tail seems to make up 66% of their body (which I have technique that works good for this part), but the head part on real Gulf Coast shrimp is hard, like a molded shell or "helmet" that a Roman Gladiator would wear protecting their soft insides...I know I fill the inside with dubbing, rubber legs, glass beads, etc...but how can we make the this "shell"? My current idea is cut a piece of hard thin clear plastic and fold it around the hook shank over my "soft insides" to complete the head. I am currently experimenting with this concept. Has anyone ever done this before? If so, are there pictures?

Have you tried SoftEx?

Robert,

Thanks. Have you tried SoftEx?

Kasper

I fish the salt (Sno

I fish the salt (Snook,Reds and Tarpon) and look forward to trying the gurgler pattern. Just learned of it in the last fly Fishing Salt Waters mag.

Fisherman's heaven!

Bill,

It sure sounds like Georgia is a fisherman's heaven! And add to that what I can only consider dominantly nice weather... I'm looking out on a dark, wet November landscape and dreaming of more friendly conditions and an abundance of fish.

We're glad to have you as a part of the GFF crowd and thank you for the kind words.

And any day you want to share tips, pictures, patterns or whatnot with the rest of GFF, let us know. I can be contacted at martin@globalflyfisher.com.

Martin

To all at GFF

To all at GFF,
First I must say, this is by far the most complete and informative fishing website I've been able to find and by far the best for fly fishing. I joined over 2 years ago and still find something new and interesting every time I come online.

I have been an avid fisherman for more than 45 years. I live in an area that is beautiful filled with fish, plant life, birds and animals that many Europeans would find exotic. An added bonus is the abundance and availability of excellent freshwater fishing within 30 kilometers. Add a lightly populated area and you have a small corner of wilderness that is truly a fisherman's paradise.

I have been using light-weight spinning gear for years and started using fly gear a few years ago. I fish inshore saltwater at least twice a week catching Redfish, Speckled Trout, Flounder, Stripers, Mangrove Snapper and Black Drum. There are also Tarpon, Spanish Mackerel, Bluefish, Jack Cravelle and the occasional Pompano, depending on the season. I don't get to fly fish in saltwater as often as I like, due to the wind, but I carry my fly gear every trip, just in case I get favorable conditions.

Sincerely,

William (Bill) Voss
St. Marys, Ga, USA
blaumax@tds.net

Hello,

This would

Hello,

This would also work well for redhorse, sunfish, and even smallmouth bass. All are quite curious, and forage heavily on insects that have fallen from the trees. Just find an area where these fish are likely to gather, and slam the fly a small distance from their holding places. As long as it doesn't land too close to them, they tend to race over to investigate. Once the race is on, the first one there (often the largest) will generally take it.

I love the simplicity of this fly. It is genius, and thank you for sharing it.

Best wishes,
Milo

P.S. I appreciate Che's goals, if not his means, and like the lighter.

What about the downy

What about the downy feathers?

Goddamn!!!dats one b

Goddamn!!!dats one big fish...wer did u catch it???

Hi im jacob im 13 an

Hi im jacob im 13 and I tie realistic flies and I would like to know how you tie that killer caddis pupa.

Roger,

You as wel

Roger,

You as well as any other fish(y) artists who want their art online here, can contact me.

Martin

Is there any way to

Is there any way to share my sculpture on your site to those who might be interested. I am a sculptor who creates both saltwater and freshwater gamefish out of stainless steel. My website is FowlerSculpture.com

Please check out my bonefish.