Recent comments

Stefan,

Yes, o.k. but I know what Rolandus means. In the hand while actually fishing, the one-piece rod (theoretically) has less weight and no stiffer spots where the ferrules/joints/spigots are. so, all things being the same, its going to be a better rod.

Of course, when you try to put it in your car, or take it on the train, bus or aeroplane its going to be a d*** nuisance. There was a short-lived craze (in the 1970's) for one-piece beach-casting rods in the UK, but they were always taken to the fishing on top of a car. At 11-12+ feet long, they must have required a garage to store them!

Multi-piece rods are a boon when you want to shove the rod in a rucsac, and the modern rods seem well-designed with good actions despite all those joints. Still, with a double thickness of carbon on the overlaps, they do weigh quite a bit more, and that must affect the action compared to the "same" rod with less joints.

Regards,
Les

Hi Martin:
I had to

Hi Martin:
I had to laugh when I read your article. You're right, of course.
However, under the right circumstances a salmon might actually take a nibble at one of these monsters.
I think that Lee Wulff in one of his articles wrote about some flies that his son had tied. They appeared to be rather crude in Wulff's eyes. Yet, they caught fish.
You never know !
Anyhow, thanks for this hilarious article.
Tom

best rod is 1 p rod! I (...)

[quote:31e1aa8597]best rod is 1 p rod! I (...) [/quote:31e1aa8597]

Hi,
there are some really nice multi piece rods on the market where I definetely wouldn't say a one piece is the better rod.
I'm sure that the "same" rod of one manufacturer with different no. of pieces isn't the same, but I'm also sure that the rod with less pieces isn't always the better one.
Stefan

Although they are ho

Although they are hooks, they are pretty Pointless!

eh gads, it certainl

eh gads, it certainly would make a fellow think twice about a mail order bride.

Thanks for the fly!

Thanks for the fly!
Few question: what is the way of fishing this fly? Was it tried in salt water only? What about lakes or rivers?
Thanks in advance!
Andriy

Hi All,

I said that I would report on the result of my complaint to the firm that sold me a six-piece Vision 3Zone #5 rod. The firm (a LARGE one based in Glasgow, Scotland) swapped the rod for me, despite not being obliged to do so in law. 😄

They sent me a 9ft Scierra CTC #5/6. A three piece, so it won't fit inside my rucsac, but it seems a lovely rod and feels like it will be able to cope with the fishing and the fish on the Danish coast next September. Bring it on! In the mean time, I'll give it a good work-out here in Devon, might even try it in the estuaries for mullet and bass next year, + anything else that'll look at a fly. Trout season is finished here till next spring 😢

Regards,
Les

I have had similar p

I have had similar problems in the past with wading jackets in the past. I recently decided that I wasn't going to pay a fortune for a jacket and decided to have a look at the lower end of the scale. I bought a Stillwater Short wading jacket from the Glasgow Angling Centre in Glasgow, Scotland. This jacket is superb and VERY affordable. After two seasons of Scottish and Swiss weather, the jacket is still going strong and is 100% waterproof. The only drawback is the neoprane velcro cuffs...a little annoying, but a small inconveniance in such a superb jacket.

Hi,

The guy in question you are refering to is: Ivar Thordal. His email is: ivar.thordal@gmail.com

The only bad thing about north Jutland is, thers are no grayling up there. There's plenty of brown trout and pretty spring fed streams.

If you want saltwater on Fyn...Give me a call or email. I can take you to a few good places in addition to Wedellsborg again, in that tickles your fancy? :?

Good hunting...Winter is going to be long this year.

Rip Van cold toes.

Welcome to the forum Ruza.

If ever you wish to experience some different areas of southern norway, don't hesistate to drop me a line.

Where abouts were you this year?

Alimar,

Welcome to you too. The forum isn't the busiest part of the site, but feel free to post anyway.

Martin

Do you fish it also

Do you fish it also as a dry fly?

Just joined the site

i fish in Scotland and enjoy tying

Agree with the name

Agree with the name of the fly. I had a chance to hook couple of fish :)

cheers

Roolis

That is pretty cool

That is pretty cool right there.

Apparently, Maxima d

Apparently, Maxima does not produce .011 in. (0X) (.28mm) leader material, yet many of the leader formulae call for it. I ordered an UltraGreen leader kit with dispenser spools and here is what arrived - .024 .022 .020 .017 .015 .013 .012 .010 .009 .008 .007 .006. Frustrated!

Buy both of them. You can't

Buy both of them. You can't have too many rods.

Already said, but th

Already said, but this is a wonderful looking general purpose terrestrial. Part wasp, part ant, part anything that flies... Nice generic, neutral brown colors... Can't wait to fish this one...on just about any species that hunts on the surface, both moving and stillwater!! I've been looking for a GP dry and this one definately flips the tippet!

Great article on the

Great article on the hopper. I've been using the Dave's Hopper for a long time. Your pattern looks interesting. Might just give it a try. I met Dave in the mid 70's at a show in Troy Michigan. He was at the Sportsman's Show in Phoenix Arizona last spring. That man can sure cast a fly line. My friend and I fished the White River in Arkansas using the Dave's Hopper and it was a killer.

Can you teach me oth

Can you teach me other ways to put flys on, like different styles.....Please

Thanks Martin!

Thanks Martin!
A picture or in this case, a drawing, says more than words!
Just make the loop and stick the cone in. This will lock the indicator to the leader and when the leader is pulled, the cone will be pulled out and both cone and indicator slide down the leader.
The cone , in my case, is cut from Finnpippette, pipette-point 50-200micro liters from Sarstedt
www.sarstedt.com . You probably find other suitable material elsewhere too

Added a drawing

Steve, Svend,

I have added a small drawing, which tries to explain how it works. Hope this helps.