The Global FlyFisher
Simply the Best Place to go for Online Fly Fishing and Fly Tyinghttp://globalflyfisher.com/node/14194
DIY Tying Station
How I made a tying bench, which I can have on my lap while sitting in my best chair watching TV. And how you can do the same.
The idea for this contraption was conceived during the Christmas and New Year's holiday 2005/2006. I had quite a lot of time off, and as it seems customary during the holiday the TV was overflowing with good movies. The result was that I actually spent quite a lot of time in front of the tube. At the same time I was on my fill-the-box quest and these two things kind of worked against each other. In order to have them merge, I needed to be able to conveniently tie flies in front of the television.
Tour de France Tying
I have introduced the concept of tying in front of the TV before in my Tour de France tying article, and back then I just put my stuff on the coffee table in front of me. But since we rearrange our living room with regular intervals I can never really be sure that the couch or my comfy chair and the table and the TV are actually in line. Because of this I have occasionally been twisting my neck to catch things on the screen while tying.
Download simple drawings in PDF-format here:
Links open in a new window and require Acrobat Reader or some other PDF-reader.
So I needed something more flexible, something that made my tying independent of the living room arrangement. And maybe even something, which was set up permanently for the purpose of tying flies, which my girlfriend for some reason says the coffee table isn't.
I played with the thought of a small table, sort of a TV dinner arrangement thingy. But that takes up floor space and requires a rather large setup in order to be able to work in front of a comfy chair.
The gizmo had to be a small board of some kind, which I could rest on my lap or on the arm rests of my chair.
These things are often referred to as tying stations. They can be found in rather large numbers in catalogs and on the web. Most of them are beautiful pieces furniture with some excellent woodwork, but most of them have far too many facilities for my taste. I was aiming at something simple to hold the vise and assorted tools.
So it was on to the DIY stage.
What I wanted from my fly tying board was:
- a stable platform for my vise
- space for a small selection of tools
- space for smaller bags of materials
- holders for thread and wire bobbins
- space for waste
- holder for finished flies
On the other hand I didn't need a lot of space for materials like drawers, small cabinets or similar facilities. This device was just going to be my workbench, and was not meant for storage.
I don't use many tools when I'm tying, so the need for tool storage would also be limited. I still wanted to be able to set my tools aside while tying: a pair of scissors, a bobbin holder or two, a dubbing needle (bodkin), a hair stacker, clippers for wire and bead chain. I usually have several bobbin holders with different colors of thread. Apart from that, I often use some wire on spools.
Enough talking. Enough thinking. Enough planning.
I went on to some practical experiments.
I needed some kind of board for the purpose, and luck would that had a couple of loose shelves lying around. So I sat down in the chair to try the planks on for size.
My original idea was that the board could rest on the armrests of the chair, but that was not a good idea. My hands, arms and shoulders were all too high and very uncomfortable in the right tying position. Luckily the other board was a bit narrower, and fit perfectly between the armrests.
When I placed the vise on the board, the height was fine. I had found my basic board: a glued pine board with the measurement 30 by 60 by 2 centimeters or 1 foot by 2 and about ¾ of an inch thick. It had sharp edges, but a little sandpaper took care of that.
Fixing the vise
The vise has to be steadily attached to the board. My vise has a very heavy, rubber-padded base, and merely placing that on the board was enough to secure it. But most pedestal-based vises are far too light to be able to survive this way when the boat rocks.
If you own such a vise you can either consider clamping it on to some kind of bridge, which you construct on the board, or - even better - buy yourself a heavy base. That will benefit you other places too.
Another option is to buy an inexpensive base, or even a whole, cheap vise, and fix the base to the board with hot melt glue or screws. Most vises have a 3/8 inches stem and will fit in each other's clamps and bases.
My next step was to start laying out the work area. I wanted some holes and pegs to set my stuff in and on. The vise with its heavy pedestal would just rest on the board. I didn't want to clamp it on, mostly because the clamp would protrude below the board and make it impossible to set it on a table. On the other hand I didn't want to build up a scaffold for the clamp, so the easy solution was just to put it on the board.
So I placed the board on my lap, and set the vise on the board. Since I'm right handed, it wound up a little to the left in order to place the fly in the center, which left ample space around the base for the rest of the building blocks.
Now it was time to dig into the wooden scraps and find some small pieces in various sizes. My idea was to add a block with small holes for scissors, needles and bobbin holders and a flat piece of wood with a few pegs for spools and maybe one with some larger holes for my varnish, dubbing needle cleaner (a film canister) and what-have-you.
Apart from that, I was looking for some way to create a flat compartment for hook packages, small bags and the like plus maybe somewhere to put scraps and trims. I had some small trays, which originally contained dried figs, a popular Christmas fruit-treat here in Denmark. The trays were not exactly perfectly made, but could do with some cleaning and sanding.
The precise layout of this had to depend on the shape and sizes of the scraps I had.
My first experiment was to get out the blocks I had, and just move them around on the board, visualizing the finished board with holes, trays and pegs. I didn't get to a final result in the first phase, but found the wooden bits I could use.
Hey ho, hey ho!
These bits now went into the basement to my small workshop, and I started sawing, drilling, filing and sanding to get different units to play with. Some of my products didn't really wind up as I wanted, while others seemed useful.
Using a small Dremel style drill I started drilling small holes in a block, and then expanded some of them to suit my tools. I also used a couple of large spade drills to make larger holes in a couple of flat pieces of wood. I often use pliers and cutters when tying, so I needed some kind of holder for heavier tools with thick handles. This was achieved with a couple of small strips of wood, a piece of dowel wood and a narrow spade drill.
After sanding all the parts to a smooth finish with rounded edges and corners I was ready to finish the layout and fix the different parts to the board. Before permanently gluing anything, I put the tying station on a table and cranked out a few flies. I put all accessories on my vise - thread , tying background and my McKenzie vise light. I then placed the newly made wooden thingies temporarily on the board and put my tools in them. While first laying out the board I had formed a general idea and while tying I fine-tuned the placement.
My findings were:
- I needed my most commonly used tools to the right of the vise
- I wanted a tray right under the vise, maybe with a small container for smaller scraps
- Thread spools and other things could be placed behind the vise
- Larger tools could also be placed on the back edge of the board
- The large containers like varnish, wax and similar stuff to the left
Take care not to place any high tools or containers on either side of the vise. The area to the right is particularly sensitive if you tie with your right hand. If you utilize a rotary vise the left side should also be free of disturbing objects.
I have already tied the first flies - both by a table and with the mobile tying bench in my lap - and it works. There is still room for improvements. I need a place to put my scraps. I have experimented with different small containers, and might be onto something with a small pen cup originally meant to be placed on a desk.
I also need a place to stick the finished flies. I bought a bunch of cheap cork disks in IKEA and I will probably just cut a piece of one of them and glue it onto one of the wood bits on the board.
Apart from that I'm quite satisfied with the result, and ready to fill the boxes in the coming weeks.