Published Sep 1. 2015 - 4 years ago

Giant Buzzer

Jan Grandal-Johansen
Pattern type: 
  • Tie in the black kevlar at the head, work back down the body tying in the kevlar to where the bend of the hook just starts.
  • Go back to the eye just stopping short
  • Start to rap the kevlar back to the eye, not touching turns just missing each time to create a gap exposing the black thread. Tie down very well ( kevlar can slip if not tied down well).
  • Now have alook at the buzzer and decide how big you want the head. ie go back with the thread say just short of a 1/4 of a inch a rough guide only gently move forward to just short of the eye and build a small cone shape
  • End the thread behind the cone. Tie in two biots one each side.
  • Tie down behind the eye tie off.
  • A little tip I do is once you have tied off the buzzer at the eye,is get the thread again and go behind the goose biots with the thread and do a tiny little cone tie off with 2-3 turns only.
  • Finish of with a good coat of flu glue, On the thread and biots only not the Kevlar, and repeat when dry

Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.