Published May 29. 2022 - 1 year ago
Updated or edited May 29. 2022

PPE - Partridge Parachute Emerger

Articles w/pattern

Originator: 
Nick Thomas
Pattern type: 
Emerger
Skill level/difficulty: 
Easy
Instruction: 
  1. Run on the thread behind the eye, take back about a third of the way along the shank and remove the tag end.
  2. Fold a piece of poly-yarn around the shank from underneath, secure with cross wraps in front and behind and then wind the thread up and down to form the wing post.
  3. Take the thread down to the bend and tie in the woven edge trimmed from a piece of cream organza ribbon coloured with an olive marker.
  4. Wind the organza up to just behind the wing post, tie in and trim.
  5. Strip the base of a partridge feather, tie in the stem behind the post and then a little way up the post.
  6. Dub behind and in front of the post leaving the thread hanging a short distance behind the eye with just a short length of thread out of the bobbin holder.
  7. Hold the end of the feather in hackle pliers and make two or three turns around the post working down toward the hook finishing with the hackle pliers hanging on the near side of the hook.
  8. Bring the thread around the hook and make some thread turns over the feather wiggling the tip of the bobbin holder to steer the thread between the feather fibres.
  9. Remove the hackle pliers and snip off the tip of the feather. Fold back the post and hackle and add some dubbing to complete the thorax.
  10. Smear the thread with varnish, whip finish and cut the thread.
Materials: 
Hook
Hends BL550 #12/14
Thread
Sheer 14/0 brown
Abdomen
Olive organza selvedge
Post
Semperfli iron blue poly-yarn
Hackle
Olive partridge
Thorax
Olive squirrel dubbing
Related content: 

Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.