Published Sep 1. 2015 - 8 years ago


Articles w/pattern

Chris Edghill
Pattern type: 
Warm saltwater fly
Skill level/difficulty: 
  1. Cut a piece of Corsair tubing to required length.
  2. Flatten and stretch to a fish' shape, use the thread center line as the lateral line.
  3. Put a large needle in to the vice and tie on the thread at the point.
  4. Attach a bunch of silver Lite Brite and tie off.
  5. Slide the Corsair tubing tail upp to the tie in point of the tail and attach the two
  6. Apply some Superglue and when dry slide it off the needle.
  7. Thread the hook through the opening in the Coursair tubing and out through the stomach area about 1 centimeter from the head.
  8. Tie in the thread at the eye of the hook and tie down the tubing, building upp a tapered head.
  9. Whip finish and glue with Superglue.
  10. Apply the Prismatic Eyes and a coat of epoxy so to keep the shape of the head and to increase durarability.
  11. Use permenant makers for the lateral line and back colour as required.
Mustad 34007 or equivelant no.4/0 to 2
White mono waxed thread
Pearl or silver Corsair tubing
Prismatic stick-on or equivalent
Super glue and Epoxy
Chick marabou

Log in or register to pre-fill name on comments, add videos, user pictures and more.
Read more about why you should register.