I just finished reading The Soft-Hackled Fly and Tiny Soft Hackles by Sylvester Nemes which inspired me to surch on line for more articles about wet flies.
Thanks for the article and pictures, my next move is to the bench!
- Log in to post comments
I just finished reading The Soft-Hackled Fly and Tiny Soft Hackles by Sylvester Nemes which inspired me to surch on line for more articles about wet flies.
Thanks for the article and pictures, my next move is to the bench!
Gus,
Thanks! I was actually quite happy with it myself. I was drying up after having been under and had some time to spend while the others fished on. I fooled around with the "reel on car roof" theme and this was just one of th quite good pictures that came from that.
Martin
Dear anonymous,
"Flap around" and "out of the water longer than is necessary" and "warmer months"...? Where does it say that about the above fish?
This fish was handled with utmost care, out of the water for about 20-30 seconds resting calmly on a weed bed about 2 feet from the water in the autumn and swam away with splashing vigour once I released it. Trust me, it was not harmed.
You are not the first person to question the robustness of pike, and I would like again to ask for some documentation of the fact that pike are more delicate than most other fish - apart from the fact that the sheer weight of large pike makes certain considerations necessary.
As you can read in my article elsewhere on landing and releasing pike, I generally consider pike a tough fish, which can endure a bit of handling. I do NOT recommend handling the fish for more than mere seconds in or out of the water, but specimen anglers have told me that pike can survive for very long periods rolled into a damp carp mat or kept in shallow water in a keep net.
Now, I do NOT endorse or recommend such treatment of any fish, but it just tells me that the few seconds that my pike are usually out of the water and the way that I handle them will hardly do them any harm.
Again: please refer me to some documentation that says otherwise and I will revise my way of doing things and writing about them.
Martin
Quote "Luckily the pike was quite calm. Pike are very robust and can endure quite a rough handling and several minutes out of water."
What a magnificent fish and what a disappointing comment. It is completely untrue, despite their appearence and predatory lifestyle Pike are actually one of the most delicate and sensitive fish and highly prone to serious damage when on the bank which can often be fatal if they are handled incorrectly, allowed to flap around on hard services and kept out of the water for longer thaan is necessary, especially so in the warmer months. To suggest that they are a hardy fish that can handle rough treatment on a fishing website is most irresponsible.
Amazing Picture !!
Congratulations !
That is the skinnyest Esox of any kind I have ever seen. Was the fish caught in April? Boy does he look shagged out.
do you conect the tippet to the leader and can you recomend a guide for me in ohio for the Clear Fork river
Martin, I know this status from my own experience. I find myself in similar condition in our living room in front of the TV, playing with a fly reel or sitting in our home-office playing around with my favourite fly rods or a new blank... (currently a two hander). There is just one relief: Go fishing even if conditions might be not perfect, this is what I do even if I have to choose a by far not perfect place due to wind conditions. Rgds, Ole
Clode,
I also started tying flies years before I got my first rod. Just keep going.
Kasper
Really great article! I'm waiting for the spring. Very, very....
:D 11 and casting all day... Iam strong guy :lol: ..... But my 9 has to enough....What materials you are using for poppers? Because I tried to make them from balsa wood, but thats not what I want.And poppers bodies what I get here is to small...Ill try foam or somethink like that... :cry: .What you mean?
Hi Kasper,
New to this and had a ball playing with eyes today. Out of desperation pulled mono off old fishing pole and used clear nail polish just so that i could make one of the shimps with real eyes. Thanks, still trying to learn terms and hooks types love the art of tying dont even have a rod yet:)
I know how you feel! I CAN'T WAIT for the water to open up!!
Damn where are these lekker possies u are fishing at?
What part of the Vaal were u fishing when this was taken?Please let me know
It's just a pity the Vall river system isnt as clean as the Zambezi river.
czech nymph, hydrorsychidae larv, shrimpbrassie pheasant tail nymphs? I will appreciate it if you could please give me info on purchasins the above mentioned flies
[quote:f0e787442b]My biggest worry is that when I die, my wife will sell my fly rods for what I said I paid for them.[/quote:f0e787442b]
God, is that funny.
If you really want to do this on the cheap... I just made one of these from a 9 volt battery, a hunk of old guitar string and duct tape. Be sure to cover one terminal when not in use!
Great Site. Nice to see talk about things other than dry flies
[quote:8377c47a52="ASO"]Hey Burkala,
I hope to go to Turkey, Antalya in the middle of October this year. Is it not legal to fish trout in the period after October 1? And if it's legal, do you know where it's good to fish in the area?
Thanks, and kind regards
Asger
asgero@gmail.com
Denmark[/quote:8377c47a52]
Dear Asger,
Unfortunately the trout season in Turkey ends after 1 of October. I'd advise you to arrange your vacation to an earlier date because there are very nice locations where you can fish trout in Antalya. By the way, foreigners in Turkey need to attain a permit to fish in Turkey. Altough there are'nt much strict control, its appropriate to attain one may you face a official person. As for the locations, a can advise you the upper reaches of Dim and Manavgat streams. They are all turqouise streams where you can find lots of rainbow trouts.( all fugutives of fish farms ) But ýf you want to fish natural browns, you need to contact the locals or fishing companys, or I may be of help if I can arrange some spare time. You can contact me in person and I'll do my best when the time comes
Regards
Burak
bkalac@hotmail.com
I've had a tool I got from a doc for a number of years...The batteries died and I used a pipe cutter, making a cut about l to l 1/2 inces from the top, carefully separated the two pieces, took out the two dead batteries and inserted some new ones, put it back together using friction tape to seal the cut and "olay" its good for another round...
Nice article...Over the years I went the painted eye route and you have to have steady hands or its fouled up... I know that Goop is pretty good but I feel I have an easier and quite a bit faster way of doing this...It works on thread, hair, paint, balsa, bar bell eyes, you name it and it sticks...It dries clear, does not stick your fingers together as super glue does and costs about $3.00 to $4.00 a bottle (can't remember what I paid for it as I had it a number years)...The product is called Jewel Glue Mfg by Delta Technical Coatings Inc,, Whittier Ca 90601 and was developed for gluing glass beads etc onto fabric ...I use doll eye style eyes that you can purchase in most hobby stores at reasonable prices..(Our area it is "Hobby Lobby")...You put a small drop on, put the eye on (I have a offset tweezers that you squeeze to open and it closes when you let go) with the tweezer and drop it and use a tooth pick to push it down...If you did it right, a small ridge of glue will come up and will help contain it where you put it...Let it sit for 24 hrs...To really make it stick you can coat the eye with Locktite Quick Tite (Brush Style) Super Glue...Try it...I hope it works for you as well as it did for me...
… I have a small favor to ask.
Support the Global FlyFisher through several different channels, including PayPal.
The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.