Skip to main content

Recent comments

Steve,

There's no reason to be skeptical! This system works just as described and creates a very durable and smooth connection, which has been used by thousands and thousands of anglers. It can fail, of course, but so can any connection. Lines get worn, coating cut through and knots slip. We've all been there.

I used this method for many years when I started fishing, but use a needle or Albright knot nowadays. I have no problem recommending the system to novices who might find the knots a little intimidating or need to be able to easily change the fly line on a reel without cutting any line.

Martin

Submitted by Steve on

Permalink

Just seen this and, yes, I am a bit sceptical. I've always attached backing with an Albright knot.

Submitted by Marinus van Ro… on

Permalink

A very good side with fine patterns for every fly-tyer.
Keep up the good work.

Submitted by Freeloader on

Permalink

You dont need a sliding tube float, although it may be better. I use a fixed one, with two holes either side of it.
I think there are advantages to using this type however. By fixing the bubble at the end of the line and having 2-3 flies up the line spaced apart(up to you by how much) you can do something quite special in a breeze. You can mimic insect life of water moths and water beetles. The breeze lifts the fly out of the water and then you can temper it back down gently on to the surface by adjusting slack line. the disturbance attracts fish and you can mingle your flies among the real insects.
This float position is better for surface fly fishing, not so much for getting the fly to any decent depth however. So experiment.

Cheers Anonymous,

The list is updated daily, and usually up to date, and with more than 220 videos by Davie McPhail, I doubt that the list can be more complete than it is. I scour the web daily for new entries, and usually add them the same day they are published - as with today's McPhail-video, which was added before I saw your comment.

If you are impatient, you can suggest the new videos yourself, and I will publish them as soon as I see your suggestion.

Martin

Submitted by Cheers! on

Permalink

Enjoy Davie McPhail's tying, and your convenient list of many of his flies. Is there some way his newer flies will be put into this list? It would be great if it can be ongoing. For instance, he just published a new fly since your # 1.

Thanks for the effort so far.

Hello PoppyT.
Yes, Lucca is nearby and is bathed the Serchio river which is similar to the Magra river, especially for fish.
Nice to meet you

Hello Martin,
thanks for the welcome ....... when I prepared an article, I will contact you

In which section I can post some pictures ?

Submitted by Matt 1737246307 on

Permalink

Davie,
Great videos and technique. A quick question. How do you keep your super glue from drying out? What sort of dispenser do you use and is there any suggestions about preserving it?
Thanks,
Matt

Submitted by 1737246307 on

Permalink

Frank Horberg was a friend of my father and my uncle Flyrod Bill Cook a salesman for Weber Fly Company. All of them were founders of the local Isac Walton League and deeply involved in trout stream restoration. This was back in the 1920s . He was a perfect example for Game Wardens then and now.

Submitted by Alec Stansell on

Permalink

If you go to the Gapen tackle Website you can buy a DVD of Dan Gapen, Don's son, tying a muddler in the manner his dad and he originally tied it. The only difference from the above is that the original was tied on an Allcock's streamer hook and red thread was used.

Submitted by William Kahler on

Permalink

I attended a TU meeting in Hazleton, Pa. back in 1980 where Poul was the speaker. He presented a 35mm slide review of how he ties a Sir Conrad salmon fly. I am a tier of the easier salmon flies and never forgot this well delivered tying lesson.

Andrea,

Welcome to GFF! Glad to have one more Italian fly-fisher amongst us.

As already said: post some picture - or contact me if you are up to doing an article on your beautiful region and its many opportunities.

Martin

Martin,

Regarding the weighted flies. Have you thought of using a loop of heavy test monofilament instead of rabbit? That would also work as a weed guard as well. Mono is certainly cheaper than rabbit fur.

Submitted by Stephen Clarke on

Permalink

One of the advantages of a tube fly is that it can slide on the leader away from the fish so that teeth do not damage the dressing, thereby increasing the longevity of the fly. Should only one end slide using this system the fly will be lost.

Hi, Andrea.
Welcome. I'm looking forward to those stories.
How about some photos?

My Grandmother was from Lucca which I see is only 2 hours
or so from you.

Nice to meet you.

PoppyT

I just tried using this setup by taking a tube fly that was built on a medium size tube. I used a micro tube as directed by the setup instructions in this article. One thing you forgot to mention is that you must also melt a collar on the side of the insert tube that fits into the tube fly so that it is tight and will not fall out. The insert tubes must be snug inside the tube fly or you will lose your tube fly. There is nothing to hold the insert inside the tube fly. In addition, the insert cannot be too snug or tight because that would defeat the purpose by not being able to get the inserts out quickly to change flies. I think you are going to have a problem switching from different size tube flies, i.e.: large diameter tubes or medium diameter tubes unless you only build on one size tube. If the insert becomes lose, you can kiss your tube fly goodbye. In theory it sounds wonderful. In use is another story. Good luck with this. I will stick to running the tippet through the tube fly and not worry about losing my flies.

Ummm, not knowing better when I started using a tube fly; I tied a long loop at the end of the leader, sent the loop through the tube and then through the eye of the hook as a 'loop to loop' or square knot. Save the loop when doing a fly change.....

This is a great idea. Unfortunately it won't work if your building your flies on micro tubes to begin with. You're basically building your flies on medium or large tubes and sliding the micro tube inside as an insert. The basic idea is worthwhile and definitely has it's place in tube fly tying. Good job!

Since you got this far …


The GFF money box

… I have a small favor to ask.

Long story short

Support the Global FlyFisher through several different channels, including PayPal.

Long story longer

The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.