Recent comments

Hi Ripley,

I've been looking at those [url=http://www.looptackle.com/website1/sd_page/147/1/index.php]Loop CLW[/url] reels as well, they're not too expensive and they get great reviews!

Done a bit of researchl! Apparently the clear one is better as its stronger and lighter than the black one! It is made from the same material that riot shields are made of and is virtually indestructable! [url=http://flyfishingforums.hipwader.com/viewtopic.php?pid=6945#p6945]click here[/url] its the thread posted by "TheKeeper" close to the bottom!

They are selling them in the UK at the same price for black or clear!

Might be tempted to go for the clear as well !!! (Hope that wouldn't spoil your street cred!)

See you at the summit.

Jonathan[/url]

Jonathan,

Unfortunately, I can't give any recommendations for the reel you mentioned.
For 4 years I have used a Fenwick Nighthawk, as in the picture. It's pretty robust and takes a hammering and to be frank...What ever you are going to use for the salt - must be able to stand the most corrosive element on the planet - salt.

I also know that the VISION XLA is pretty darn good and most of the reels made in Composite from Loop, Vision and Scierra. There are so many on the market so choose well and don't be sucked into buying something that equals a household mortgage.

The main thing you want is a reel that can stand the salt, minimum moving parts and a good drag.

I have just received today, a LOOP CLWC.

I have heard it robust and thought I'd treat myself and besides...It looks dandy.

Allan...
My Fenwick is a 2 piece but I doubt there's little difference between the two.
Good hunting. I am also out this weekend for sea trout.
I am sure the Fenwick will do you justice.

Tight lines
Ripley

Submitted by dusko lisska on

Permalink

very impressive my friend, but I´m a question for you.
Dear Sirs
Do you have any information about fly rod Milward¨s, made in England I suppose 50-60 years ago, type Fly craft-bamboo, length wise 9´0½ ft (2.74m), 3 section, one handed with classic cork cigar shape and with snake line guides. Can you help me in my research and tell me please manufacturer of Milwards fly rod Flycraft with his e-mail and fax.
Best regards

Dusko Lisska
e-m. dusko.lisska@hznet.hr

Submitted by Matt Schroeder on

Permalink

I had two rods that had their gloss finish bubble completely off from storing a rod in a PVC rod tube that was homemade. I was able to scotchbrite the failed finish off, and refinish the rods. Since then, I know there have been changes made in PVC formulations, so I don't know if this may happen with some rods or not. Also, I can't speak for black ABS, but I thought it was worth mentioning.

Beautiful picture of Monomoy. I love how much that island changes every year. Just before I moved from Mass. to NOVA I painted the outside of Charlie Fuller's house on Morris Island. That is the view from his house. Probably the nicest view on the Cape.

Hi Rip

Actually I have a Fenwick HMG AV #5 4-piece rod in my possesion. Maybe I should try it out on the coast, and se if I get lucky :wink:

I have no appointments this weekend, so from friday afternoon to sunday evening I will be hunting seatrout at the coasts on Fyn :D

Regards
Allan

Hi,

Great fish Ripley, looking forward to hooking some of those in the summit this year!

I'm looking to buy a new saltwater fly reel and was wondering if you had any recommendations?

At the minute I'm leaning towards a Vision GT, do you have any comments on this reel?

Cheers
Jonathan

Hi Allan,

I have been using a class #5 at the Danish coast for longer than I can remember. Regardless of conditions and seasons, I have never experienced any problems with a 5 weight.

The rod I started with up until 2005 was a Fenwick HMG AV #5 (gavf 905-2 9ft #5), and a medium action.
The fact of the matter is...I still have the rod and it's still in excellent condition, including the cork.
I even used it at the last GFF summit and landed some nice fish on it. Pictures are ever present on the GFF '06 article.
It's not mean't to be for saltwater but it copes - and very well.
It is very light and browsing the weight charts and characteristics, it seems rated well and simillar to other 5 weights.

Many put down Fenwick but I havenever had any problems with them.

Last year, I picked up a Vision #5 for dirt cheap and, although rated a freshwater rod, it handles the salt well but I am reluctant to retire my Fenwick. Call me sentimental but the Fenwick has given me much luck and nice fish so as long as "she" continues to do me proud, I'll abuse "her"!

I suppose the main reason why I always enjoy to argue that a rod between a 5 and 7 weight is perfect for the Danish salt, is because I know the weight in question can handle Danish salt and the size of fish present.
I see many thrashing the water with heavy #9 and even #10 weights. Why?

My Fenwick will be back in action at the GFF summit '07. No doubt, "she'll" do me proud - again.

Maybe Fenwick should pay me for this promotional piece?

Rip Van "I love my Fenwick".

Hi Rip

You are using a #5 rod for seatrout on the danish coast ......, is it one of those special saltwater rods which is typically classified one or two classes below?

To get a lighter rod for the coast, I bought a Fenwick Techna AV Saltwater #6 , but actually
it is a lot heavyer than my class 7 Fenwick Ironfeather :wink:

What specific class 5 rod are You using for the coast?

By the way, the 8 feet #4 Zeplin & König rod, I bought from You worked very fine for me, under my trip to Slovenia. I caught a lot of grayling, brown trout, rainbows and a single marble trout :D

Kind regards
Allan Wermuth

Mooncussers...shiftless near-do-well shore bound pirate wanna'beeez who would meacon ships aground and pillage the booty...
(not to be confused with MoonBatz TedKennedy/JohnKerry)

Here's another eye-in-the-sky glimpse of the neighborhood...
and a stripes seasonal visitor...PhlatWing to go...

[quote:01c9ea8fe5="Esox"]They fight a hell of a lot harder than their size. Don't they, Rodney. How did you fish the nymphs?[/quote:01c9ea8fe5]

Different kind of fight to a salmonid, the broad tail sure makes them hard to come up to the surface. :) Our typical target fish here are salmon, steelhead and trout, so it's refreshing to fish for smallmouth bass for a few days a year. I find that their takes usually feel more like a pause or slow drag. A lot of times I mistakened them as weed or bottom. Once the hook is set, the fight is definitely very exciting. With nymphs, I just fish with wooly buggers (brown, black, size 8) by letting a intermediate sink tip to get the fly down to where they are. Most of these fish (the bigger ones anyways) are now sitting in 30 to 40 feet of water. There are also some very nice cutthroat trout in this lake, but the lake is a bit warm for them now. I did manage to "by-catch" one last weekend. ;)

[img:01c9ea8fe5]http://www.fishingwithrod.com/albums/album34/070716_16.jpg[/img:01c9ea8…]

[quote:500a21dd0e="DistantStreams"]Amazing how many different angles you can get with the same fish... :D
[/quote:500a21dd0e]

Haha... I actually have about 150 photos from the trip. :D I had a tripod set up in my boat with a video camera so I could simply flip the screen around, and take photos in between video clips that way. It's quite exciting when there is a bit of chop on the water too. :D

[quote:500a21dd0e="DistantStreams"]
Great pictures Rodney. When are you coming back over here?
[/quote:500a21dd0e]

Probably December again. Hopefully I'll connect with a sea trout on the beach this time. Last year we fished Møn cliff area but had no luck, saw a couple fish landed late on in the day. We also fished on the west side of sealand one day, and I lost one fish but I think it was a rainbow.

Amazing how many different angles you can get with the same fish... :D

Great pictures Rodney. When are you coming back over here?

Ripley

Hi everyone,

With reference to my original post I've been looking at flights from Norway to Denmark. I have found that the easiest method for me, will be to fly from Oslo to Billund and then rent a car, if I can't get a lift off someone.

Anyone who is travelling via Norway or Billund please feel free to contact me and perhaps we could travel together and/or share car rental if needed!

Cheers
Jonathan

My birding and fishing friends use to drive their jeeps to that light house before the big storm that cut up The Moy. Have you ever heard of The Mooncussers?

Submitted by S. Lonneberg on

Permalink

Beautiful photo! Here in Canada that insect would be called a damselfly.

Martin,
Is the 0.23 (2X) Berkly Trilene line tippet or just regualr mono fishing line. If it is fishing line what pound test would it be, maybe 2lb? I would like to buy it in bulk rather than 30 yard spools.
Thanks.

Submitted by Terry Still on

Permalink

oliver your flys are the best i one day hope to tie flys as well as you i have a book of yours that is in german and i cant under stand it but i have started tieing from the pictures in it and i think there not bad but still learning.thank because of you fly are fun to tie again. thank from the yukon.

Since you got this far …


The GFF money box

… I have a small favor to ask.

Long story short

Support the Global FlyFisher through several different channels, including PayPal.

Long story longer

The Global FlyFisher has been online since the mid-90's and has been free to access for everybody since day one – and will stay free for as long as I run it.
But that doesn't mean that it's free to run.
It costs money to drive a large site like this.
See more details about what you can do to help in this blog post.